国产一区二区三区色噜噜_色翁荡息又大又硬又粗又爽小玲_国产精品日本一区二区不卡视频_久久精品国产亚洲AV无码娇色

隧道掘進

在盾構機推進系統的每組油缸，都配備有磁致伸縮位移傳感器，用于測量油缸推進時的位移數據。

煤礦用掘進設備機身及機身運動機構檢測傳感器由截割臂仰角測量用的升降油缸內置磁致伸縮位移傳感器、截割臂回轉用磁柵編碼器、機身仰角傳感器、鏟板傾角傳感器組成，邏輯運算和控制系統通過安裝在機身上的各個傳感器得到掘進機的位姿信號，通過幾何運算后結合機身定位系統的位置信息對掘進機的位姿。

建材機械

       位移傳感器在智能化機械設備中主要用于位移測量與位置定位，也可以通過在線監測指示程度，特殊機械設備中的振動、漲差或者偏心性能監測，可在設備出現異常狀況時提前預警并傳輸給控制系統做出相應的關聯操作。

汽車制造

把磁致伸縮位移傳感器引入到汽車懸架系統中的減震器中,利用磁致伸縮位移傳感器實現對減震器震動幅度進行實時檢測。

從而可以有效減小汽車車身的震動,提高汽車的乘坐舒適性和駕駛平順性。

另外，汽車零部件行業從最初的沖壓到焊接、涂裝、鍛造和鑄造再到總裝，我們的磁致伸縮傳感器都可以幫助您可靠檢測零部件和控制過程

冶金制造

在動態輥縫調整裝置中，核心元件為內置在液壓缸內的磁致伸縮位移傳感器，將磁致伸縮位移傳感器應用于連鑄動態輕壓下工位，使用SSI數字量傳感器，其分辨率達到0.5微米，能夠精確反饋當前的輥縫位置，將位移量傳送至PLC進行處理，上位機據此調節液壓缸的壓下量，形成完整的閉環控制，保證了澆鑄效果。

數控機床

位移傳感器在數控機床上主要是用來檢測數控機床床移動的直線位移量或者角度位移量。

不同種類數控機床對傳感器的要求也不盡相同，一般來說，大型機床要求速度響應高，中型和高精度數控機床以要求精度為主。

推薦使用NADO拿度SSI輸出位移傳感器，抗干擾性強和可靠性高，精度高和響應速度快；并且使用維護方便，適合機床運行環境且成本低。

造紙機械

硫化機

       液壓硫化機因為位移傳感器測量反饋，精度高，控制效果好，自動化程度高，在汽車輪胎行業已基本替代傳統的機械式硫化機。

       液壓式硫化機裝胎機構和中心機構上環的高度可通過油缸內置磁致伸縮傳感器高精度測量控制，對于硫化不同規格輪胎很有意義；磁致伸縮位移傳感器方便與控制系統連接使用，可通過位移傳感器單獨對每個模腔進行合模距離控制，獨立工作。

注塑機械

應用：為注塑機的注射、鎖模和頂出行程控制提供位置反饋。
好處：響應時間快速，減低周期時間。
         堅固防震（尤其對頂出時產生的震蕩），沒有磨損，無須定期重標和維護
          持久耐用，磁致伸縮位移傳感器可使用多年依然準確。

風電機組

應用：為風力發電系統測量風速、風向等參數的精確數值。
好處：響應時間快速，減低周期時間。
         堅固防震（尤其對頂出時產生的震蕩），沒有磨損，無須定期重標和維護
         持久耐用，對于高速頂出時如使用電位尺三至六個月便要更換，拿度磁致
          伸縮位移傳感器可使用多年依然準確。

煤礦設備

       煤礦推移千斤頂專用磁致伸縮位移傳感器，位移傳感器應用于PLC控制同步頂升系統，可根據液壓千斤頂的構造與行程，選擇內置安裝型磁致伸縮位移傳感器，或者外置安裝型直線位移傳感器。
好處：重復精度高，保證定位精準。持久耐用，原用電位尺配干管接觸器有壽命，而磁尺非接觸式，壽命更長。

液壓伺服

位移傳感器在傳統液壓上升為伺服液壓時，進行位置測量與反饋。

磁致傳感器重復精度高，保持產品一致性，減少廢品。響應速度快，測量準確，使生產過程更易控制。推薦使用NADO拿度TD型分體式磁致伸縮位移傳感器，內外管分離，維護更加方便。

AE0112 切割應用

In the metal industry, devices for length division are frequently used. However, many standard solutions, which are available on the market, are not optimal for some companies. With Dimetix laser distance sensors, an economical special model can be offered.

• D系列

AE0203 軌道交通基礎設施的監控

Accurate distance measurement is essential in railway construction – for new development as well for maintenance. Speed trains of the latest generation move at maximum speeds of over 300km/h. In order to preserve the rolling stock at such strains, millimeter precise measuring is inevitable.

• D系列

AE0505 自動測量直徑和寬度

An exact measurement is extremely important when positioning and dimensioning paper rolls. The Dimetix laser distance sensors measure the width of the paper roll using two sensors on each side of the paper roll.

• D系列

AE0104 防洪閘門方位監測

In this plant, Dimetix laser distance sensors are used to monitor floodgates. This means that the amount of water outflow is known at all times. The sensors measure the exact position of the floodgates in millimeter-precision and absolutely contactless.

• D系列

AE0202 隧道挖掘的橫截面檢測

An automatic monitoring system was used in a headwater pressure tunnel to measure the passive bias of penstocks during injections. As soon as the limit values were exceeded, an alarm lamp illuminated, so that the injections could be stopped.

• D系列

AE0203 軌道交通基礎設施的監控

Accurate distance measurement is essential in railway construction – for new development as well for maintenance. Speed trains of the latest generation move at maximum speeds of over 300km/h. In order to preserve the rolling stock at such strains, millimeter precise measuring is inevitable.

• D系列

AE0205 監控鐵路軌道上方的巖層

Dimetix sensors are used to monitor a debris flow activity. These rocks can lead to the accumulation of a mountain stream, which can lead to a flooding of a rail track. In addition, two additional lasers are used to monitor a large boulder that moves downhill and puts a village in danger.

• D系列

AE0207 山體滑坡/泥石流預警系統

In order to move large structures as bridges and buildings, the PolyDist system is the optimal solution. With up to 4 Dimetix sensors the process of moving is constantly monitored so that the structure can be moved and repositioned precisely.

• D系列

AE0305 監控歷史古建筑物的形變

In historic buildings the fabric can often be damaged. With the aid of a monitoring concept which includes Dimetix sensors, the movements of historical buildings are monitored and examined.

• D系列

AE0503 料倉料位的測量

With Dimetix laser distance sensors, the level in silos can be measured exactly and at any time. The Dimetix sensors measure on different surfaces like stones, sand, grain or dark surfaces.

• D系列

AE0505 自動測量直徑和寬度

An exact measurement is extremely important when positioning and dimensioning paper rolls. The Dimetix laser distance sensors measure the width of the paper roll using two sensors on each side of the paper roll.

• D系列

AE0506 監控行車的移動定位

In a steel production facility, large transfer cars transported glowing steel plates. Due to a malfunction of the micro-switches, the cars collided at the end of a transfer line. With the help of two Dimetix lasers integrated in protective housings, a smooth production could be restored.

• D系列

AE0508 船閘、水閘提升定位

The ability to reliably and precisely monitor flood gate height is a challenge for hydropower and reservoir flood gate operators. Dimetix laser sensors can be used for remote monitoring of the flood gates. The sensors measure the distance to the surface of the flood gates.

• D系列

AE0510 監測橋梁結構形變

Dimetix helped make history in 2010 by collaborating with Applied Geomechanics, Inc. to develop a system to monitor the lift and placement of steel bridge truss sections on the Huey P. Long Bridge over the Mississippi River in New Orleans. The project involved transportation by river barge, lifting, and placement of the pre-assembled bridge truss spans to reduce stress on the bridge and minimize interruption of traffic. Ten DLS-C laser distance sensors were lifted aboard the 2,700 ton trusses and were used in conjunction with specially fabricated targets and software developed to monitor beam deflection during the day long lift.

• D系列

AE0511 建筑結構的位移監控

In modern urban environments, heavy construction often must be conducted immediately adjacent to neighboring properties and structures that must remain open to business or residency during excavation and construction. Traditional surveying techniques allow for +/-5 mm precision of displacement, but Dimetix laser distance sensor technology allows for measurements with sub-millimeter accuracy at distances up to 500 m to detect any shift or displacement of structures.

• D系列

AE0601 采礦設備移動定位

In a mining application, Dimetix laser distance sensors have been used to ensure an accurate lifting and lowering process of the superstructure. In the case of a deviation, a signal was sent to the hydraulic system so that it could be corrected again.

• D系列

AE1102 鋼鐵液位（填充和傾倒）控制

Dimetix sensors were installed in a foundry to monitor the filling of hot steel and iron. With the aid of the sensors the level can be measured and an overflow can be avoided.

• D系列

AE1601 大型建筑物的位移控制

In Norway an early warning system was developed using 3 Dimetix sensors. These measure daily the movements of rocks above a bay. Thus, a warning can be triggered in the event of a landslide.

• D系列

AE0401 卡車位置的測量

In times of increasing traffic and ever more demanding tasks where time is of the essence, a system was developed to speed up customs checks on HGV vehicles. This device helps to significantly reduce time consuming check ups on vehicles since the positioning of the trucks is done with sensors. Customs uses mobile X-Ray scanners to check the content of trucks and containers. During the scanning process the movement of the scanner must be determined precisely.

• D系列

AE0502 玻璃面板尺寸的測量

In order to transport glass panels, they are positioned after production from a conveyor line onto a pallet. To prevent a glass breakage, a system with DIMETIX sensors was developed, which precisely monitors the positioning.

• D系列

AE0506 監控行車的移動定位

In a steel production facility, large transfer cars transported glowing steel plates. Due to a malfunction of the micro-switches, the cars collided at the end of a transfer line. With the help of two Dimetix lasers integrated in protective housings, a smooth production could be restored.

• D系列

AE0507 調節鋸齒的對齊

Large saw blades used for cutting different materials frequently shift out of alignment, resulting in cuts at the wrong angle and unnecessary reworking and scrap. A maintenance free laser distance sensor saw blade alignment system provided a reliable,repeatable, and cost effective means of improving production quality and eliminating unnecessary scrap.

• D系列

AE0508 船閘、水閘提升定位

The ability to reliably and precisely monitor flood gate height is a challenge for hydropower and reservoir flood gate operators. Dimetix laser sensors can be used for remote monitoring of the flood gates. The sensors measure the distance to the surface of the flood gates.

• D系列

AE0509 切割方案的激光控制

Increasing operational demands, maintenance requirements, and the growing importance of efficiency are factors in nearly all industries. This is relevant in the metals production industry, and especially true for the small to midsized companies at the heart of the fabrication & metalworking, where laser measurement technology provides an economical approach to reducing production delays and improving quality, as well as an affordable technological advantage helping to increase efficiency.

• D系列

AE0601 采礦設備移動定位

In a mining application, Dimetix laser distance sensors have been used to ensure an accurate lifting and lowering process of the superstructure. In the case of a deviation, a signal was sent to the hydraulic system so that it could be corrected again.

• D系列

AE0701 木材粘合時的長度定位

Spruce wood has been produced at our customers facility for decades with great care and professional competence and is not a freely interchangeable product. Because the big difference is in countless details that have been perfected over the many years. Our customer has the most modern know-how for the production of cuttings for a wide range of applications such as planking, timber construction, roof constructions, pallet production etc. Dimetix lasers are used daily. The truss length is used for positioning and to enhance their operational efficiency.

• D系列

AE0207 山體滑坡/泥石流預警系統

In order to move large structures as bridges and buildings, the PolyDist system is the optimal solution. With up to 4 Dimetix sensors the process of moving is constantly monitored so that the structure can be moved and repositioned precisely.

• D系列

AE0701 木材粘合時的長度定位

Spruce wood has been produced at our customers facility for decades with great care and professional competence and is not a freely interchangeable product. Because the big difference is in countless details that have been perfected over the many years. Our customer has the most modern know-how for the production of cuttings for a wide range of applications such as planking, timber construction, roof constructions, pallet production etc. Dimetix lasers are used daily. The truss length is used for positioning and to enhance their operational efficiency.

• D系列

AE0503 料倉料位的測量

With Dimetix laser distance sensors, the level in silos can be measured exactly and at any time. The Dimetix sensors measure on different surfaces like stones, sand, grain or dark surfaces.

• D系列

AE1102 鋼鐵液位（填充和傾倒）控制

Dimetix sensors were installed in a foundry to monitor the filling of hot steel and iron. With the aid of the sensors the level can be measured and an overflow can be avoided.

• D系列

AN2001 數字顯示

This application note shows how to display a measured distance value on a standard external numeric digital display. Description of the wiring and sensor configuration are included as well as two samples are given.

• D系列

AN2002 SSI接口用法

SSI is a widely used serial interface standard for industrial applications between a master (e.g. controller) and a slave (e.g. laser distnace sensor). On an SSI communication channel, the master generates a clock, while the slave sends the data corresponding to the received clock signal. Only point to point communication is possible with the SSI interface. The RS-422 standard defines the electrical signal levels of the SSI interface.

• D系列

AN2003 RS-422 連接到RS-485

This document explains how to connect the RS-422 interface of the laser distnace senor to a RS485 two wire interface. This application note requires special skils, therefore it must be requested by e-mail.

• D系列

AN2004 EXCEL示例

This application note describes how to control a Dimetix distance sensor connected to a serial interface by VBA (Visual Basic for Application). The VBA program is integrated into an EXCEL worksheet.

• D系列

AN2005 S7 S7 Profibus連接示例

This application notes describe the connection of the DIMS Profibus converter to a S7 PLC and a Dimetix laser distance sensor. The S7 sample project is also available for download on our web site.

See also: 500214 DIMS Profibus external Interface

• D系列

AN2006 定時測量特性示例

The Laser distance sensor offers configuration possibilities for fix timed measurements. This application note gives some configuration examples and describe the specialities of the timed measurement characteristic.

• D系列

AN2007 附加測量過濾-距離跳變檢測

The D-Series laser distance sensors provide a wide range of configuration possibilities. This document shows how to configure the distance jump detection feature. This feature works like a plausibility check of the measured distance. A typical use cases can be positioning applications e.g. in the logistics.

• D系列

AN2010 通過RS422連接S7

This application notes describe how to connect a laser distance sensor to a CP340 interface of a Siemens S7 PLC. The configuration and the wiring is described. In addition to this application note an example for the S7 is also available on our website.

• D系列

AN2018 通過RS422測量移動目標的特性

The "Moving target characteristic" is made for fast position measuring on continuous moving targets. This document describes the necessary settings of the laser distance sensor for the "Moving target characteristic" as well as the configuration of the RS-422 interface.

• D系列

AN2019 通過SSI測量移動目標的特性

The "Moving target characteristic" is made for fast position measuring on continuous moving targets. This document describes the necessary settings of the laser distnace sensor for the "Moving target characteristic" as well as the configuration of the SSI and Analog interface.

• D系列

AN2020 用SEW驅動定位

This document describes how to use the FLS-C sensor in a positioning application in conjunction with a SEW servo drive. The necessary configuration of the FLS-C and the configuration of the SEW inverter are described . Further the wiring is also documented.

• D系列

AN2040 Profinet入門

A simple example of use to get started with the PROFINET? interface of the Dimetix D-Series laser distance sensors. All information and instructions necessary to understand this example of use and to run it on a Siemens SIMATIC S7 PLC are included.

• D系列

AN2041 EtherNetIP 入門

A simple example of use to get started with the EtherNet/IP? interface of the Dimetix D-Series laser distance sensors. All information and instructions necessary to understand this example of use and to run it on an Allen Bradley CompactLogix PLC are included.

• D系列

AN2042 EtherCat入門

A simple example of use to get started with the EtherCAT? interface of the Dimetix D-Series laser distance sensors. All information and instructions necessary to understand this example of use and to run it on a Beckhoff EtherCAT? master PLC are included.

• D系列